Symbols On The Product; Safety Instructions For Operation - Husqvarna ARST5120Xv1 Manual

Snow thrower 536 90 30-01 ARST5120Xv1

Symbols on the product

WARNING: Be careful and use the
attachment correctly. This attachment can
cause serious injury or death to the
operator or others.
Read the operator's manual carefully
and make sure that you understand the
instructions before use.
WARNING: Rotating parts. Keep your
hands away.
WARNING: Rotating parts. Keep your feet
away.
Stop the engine before maintenance.
Rotating parts. Keep body parts away
from discharge chute when the product is
on.
Do not point the discharge chute at
persons or animals.
Do not point the discharge chute at
property or areas where damage can
occur.
Look out for ejecting objects and
ricochets.
Keep persons and animals at a safe
distance from the work area and the
attachment.
This product is in accordance with
applicable EC directives.
This product conforms to applicable UK
regulations.
2
Husqvarna Service Information
1. Husqvarna model name
2. Husqvarna product number code (PNC)
Safety instructions
WARNING:
instructions that follow before you use the
attachment.
• Learn how to use the attachment and its controls
safely and learn how to stop the product and
attachment quickly.
• Do not let children or other persons not approved for
operation of the attachment to use or do servicing on
it. Local laws may regulate the age of the user.
• Do not use the attachment if persons, especially
children, or animals, are in the vicinity.
• Do not keep passengers on the attachment.
• Operate the attachment safely. Slippery surfaces
can cause the product to decrease traction, move
accidentally or fall.
• Do not put hands or feet near or below rotating parts.
Keep clear of the discharge opening at all times.
• Stop the engine before you remove the blockage in
the auger housing or chute deflector.
• Stop the engine and make sure that the augers and
all moving parts have stopped before you clean,
repair or examine the attachment.
• Pull PTO button on the product to disengage
the power to the augers when the attachment is
transported or not in use.
• Do not let the attachment out of view with the engine
on. Always disengage the PTO button, lower the
attachment, apply the parking brake, stop the engine
and remove the ignition key before you go away
from the attachment.

Safety instructions for operation

• Examine the work area and remove all loose objects.
• Do not overload the attachment capacity by
operating the attachment at too fast a rate.
Read the warnings
2104 - 003 - 30.03.2023