Advertisement
CAUTION: Turn the unit off, unplug and empty the
water tank before moving it.
CAUTION: DO NOT move the unit whilst it is
operating.
Note:
DO NOT plug in/ unplug the machine to
switch it on and off. Use the ON/OFF key on the unit
first, then plug in/unplug.
Note:
To extend the life of the appliance do not
switch the machine on and off frequently.
Note:
During the operation, keep doors and
windows closed to save energy and improve the
efficiency of the unit.
Control Panel
2
7
6
1. ON/OFF
2. Temperature Display
3. Humidity Display
4. Ionizer Icon
5. Dehumidifying Icon
6. Tank full Icon
7. Defrosting Icon
Temperature Display
displayed.
Humidity Display
Ionizer Icon
♦
When the ionizer icon is illuminated the ionizer
function of the unit is working.
♦
To activate the function, when the machine is
ON, press and hold the "ON/OFF" button for 3
seconds.
♦
To deactivate the function press and hold the "ON/
OFF" button again for 3 seconds.
Dehumidifying Icon
♦
When the dehumidifying icon is illuminated the
1
unit is operating normally. If the icon light is not
3
illuminated the dehumidifying function is not
operating.
Tank Full Icon
♦
When the unit detects that the water tank
has been full for 4 seconds the unit will stop
dehumidification. The tank full icon will illuminate
and an alarm will sound. The fan will continue to
run for 3 minutes.
♦
When the unit stops pour the water out of the
water tank (see section Removing the Water Tank)
then replace the tank in to position. Once the tank
is back in position the machine will start working
again automatically.
Note:
positioned or has fallen off, the tank full indicator
4
light will illuminate. Check the sensor and reposition
5
as required.
Note:
machine will not operate. The tank full indicator light
will remain illuminated.
Defrosting Icon
♦
When the defrosting icon is illuminated the
machine is performing its defrosting function.
Once defrosting has finished the unit will revert
back to the function it was performing before
defrosting.
Note:
(Original instructions)
The current environment temperature is
The current environment humidity is displayed.
If the tank float sensor is not correctly
If the water tank is not correctly positioned the
The unit can defrost automatically.
ENGLISH
7
Advertisement
