Emergency Starting Engine - Yamaha FT25B Owner's Manual

wheel or other moving parts when the
engine is running. Do not install the
starter mechanism or top cowling after
the engine is running.
Do not touch the ignition coil, spark
G
plug wire, spark plug cap, or other elec-
trical components when starting or op-
erating the motor. You could get an
electrical shock.
EMU30291

Emergency starting engine

1. Remove the top cowling.
2. Remove the start-in-gear protection ca-
ble from the starter after removing the
clip and the screw, if the cable is
equipped.
3. Remove the starter/flywheel cover after
removing the 4 bolts. Disconnect the
leads for the warning indicator.
4. Prepare the engine for starting. For fur-
ther information, see page 30. Be sure
the engine is in neutral and that the en-
gine stop switch lanyard lock plate is at-
tached to the engine stop switch. The
main switch must be "
equipped.
ZMU02337
ZMU02338
Trouble Recovery
ZMU02649
" (on), if
ZMU02026
ZMU02334
77