Advanced Option Menu - Philips 65BDL6005X User Manual

65BDL6005X

6.2.7. Advanced option menu

Picture Input resolution
Screen IR control
Audio Keypad control
PIP Tiling
Configuration 1 Off timer
Configuration 2 Date and time
Advanced Option Schedule
HDMI with One Wire
Auto Signal Detection
Power Save
Scalar FW Update
Picture
Screen Information OSD
Audio OPS settings
PIP Advanced option reset
Configuration 1
Configuration 2
Advanced Option
Input resolution
Set the resolution of the VGA input. This is only required
when the display is unable to detect the VGA input
resolution correctly.
NOTE: This item is functional for VGA input only.
The options are:
• {1024x768 / 1280x768 / 1360x768 / 1366x768}
• {1400x1050 / 1680x1050}
• {1600x1200 / 1920x1200}
• {Auto}: Determines the resolution automatically.
The selected settings will become effective after turning off
the power and turning it on again.
IR control
Select the operation mode of the remote control when
multiple displays are connected via an RS232 connection.
• {Normal} - All displays can be operated normally by the
remote control unit.
• {Primary} - Designate this display as the primary display
for remote control operation. Only this display can be
operated by the remote control. (In primary mode, IR key
will always be processed regardless the monitor id/group
settings).
Auto
Action
Action
Action
Off
Action
Action
Off
Action
Action
Action
20 Sec.
Auto
Action
38
• {Secondary} - Designate this display as the secondary
display. This display can not be operated by the remote
control, and will only receive the control signal from the
primary display via the RS232 connection.
• {Lock All} / {Lock all but Volume} / {Lock all but Power}
/ {Lock all except PWR & VOL}- Lock the remote control
function of this display. To unlock, press and hold the [
INFO button on the remote control for 6 (six) seconds.
NOTE： If secondary PD is set {Normal}, it always receive IR
control signal from primary PD.
Keyboard control
Choose to enable or disable the display keyboard (control
buttons) function.
• {Unlock} - Enable the keyboard function.
• {Lock All} / {Lock all but Volume} / {Lock all but Power}
/ {Lock all except PWR & VOL} - Disable the keyboard
function.
NOTE: "Keyboard Control Lock Mode" This function
completely disables the access to all Keyboard
Control functions. To enable or disable the keyboard
control lock, press both [ ] and [ ] buttons and
hold down continuously for more than 3 seconds.
Tiling
With this function you can create a single large-screen matrix
(video wall) that consists of up to 225 sets of this display (up
to 15-sets on the vertical and 15-sets on the horizontal sides).
This function requires a daisy-chain connection.
Tiling
H monitors
V monitors
Position
Frame Comp.Top
Frame Comp. Bottom
Frame Comp. Left
Frame Comp. Right
Frame Comp.
Enable
Switch on delay
Brightness
Output Content
Example: 2 x 2 screen matrix (4 displays)
H monitors = 2 displays
V monitors = 2 displays
H monitors
1
3
]
1
1
1
0
0
0
0
Off
Off
Off
Normal
Current Video
2
Position
4