1. Manuals
  2. Brands
  3. LG Manuals
  4. Vacuum Cleaner
  5. A9T-ULTRA
  6. Owner's manual

LG A9T-ULTRA Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OWNER'S MANUAL
VACUUM CLEANER
Before beginning installation, read these instructions
carefully. This will simplify installation and ensure that the
product is installed correctly and safely. Leave these
instructions near the product after installation for future
reference.
ENGLISH
A9T-ULTRA
MFL69883676
Rev.01_060921
Copyright © 2021 LG Electronics Inc. All Rights Reserved.
www.lg.com

Advertisement

Table of Contents
loading

Related Manuals for LG A9T-ULTRA

Summary of Contents for LG A9T-ULTRA

  • Page 1 This will simplify installation and ensure that the product is installed correctly and safely. Leave these instructions near the product after installation for future reference. ENGLISH A9T-ULTRA www.lg.com MFL69883676 Rev.01_060921 Copyright © 2021 LG Electronics Inc. All Rights Reserved.

  • Page 2: Table Of Contents

    OPERATION Getting Started ....................18 Charging the Battery ..................20 Using the Mop Nozzle ..................21 Using the Nozzles and Tools................24 SMART FUNCTIONS Using LG ThinQ Application................28 Smart Diagnosis Function................30 MAINTENANCE Cleaning the Appliance ...................31 Cleaning the Nozzles ..................34 TROUBLESHOOTING Before Calling for Service................38...

  • Page 3: Read All Instructions Before Use

    SAFETY INSTRUCTION SAFETY INSTRUCTION READ ALL INSTRUCTIONS BEFORE USE The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below. Safety Messages This symbol is displayed to indicate matters and operations that can cause risk.
  • Page 4 If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to an LG Electronics service centre. • Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners.
  • Page 5 SAFETY INSTRUCTION • When disposing of this appliance, follow regulations for disposal of rechargeable lithium-ion batteries. • Follow all local ordinances and regulations when handling or disposing of the battery. • Prevent unintentional starting. Ensure the switch is in the off position before connecting to the battery pack, picking up or carrying the appliance.
  • Page 6 • Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug. Take it to an authorized LG Electronics service centre or dealer for assistance. • Do not apply excessive force to the power cord to bend it, or place it...
  • Page 7 • Do not cover the power cord with a rug or carpeting. • Push the power plug firmly into the wall outlet so that it is not loose. • If the product has been submerged, contact an LG Electronics service centre or dealer for instructions before resuming use.
  • Page 8 • If the earth leakage breaker is tripped when the product is put on the charging station, immediately remove the appliance from the charging station. Contact an LG Electronics customer service centre. • Use extra care when cleaning on stairs.
  • Page 9 SAFETY INSTRUCTION Maintenance • Make sure to unplug the power cord when cleaning or maintaining the charging station. • Do not wash the inlet port or the dust bin with water or detergent. • Do not use detergents, polishes or air fresheners to clean the dust bin.

  • Page 10: Caution

    SAFETY INSTRUCTION CAUTION CAUTION • To reduce the risk of injury to persons, malfunction, or damage to the product or property when using the appliance, follow basic safety precautions, including the following: Operation • This appliance has a built-in safety device to prevent damage from overheating.
  • Page 11 SAFETY INSTRUCTION • Do not use the mop nozzle to clean the same spot repeatedly for an extended period of time. The water injection at the mop nozzle may cause water to get into the dust inlet and damage the appliance. •...

  • Page 12: Installation Product Overview

    INSTALLATION INSTALLATION Product Overview The images in this guide may be different from the actual components and accessories, which are subject to change by the manufacturer without prior notice for product improvement purposes. Front View *1 This feature is only available on some models. Product Body Extension Pipe Nozzle...
  • Page 13 INSTALLATION NOTE • Use the vacuum cleaner only with the provided charging station. Using a charging station other than the one designed to be used with the vacuum cleaner, as improper sealing of the chagring station may result and dust not being emptied from vacuum cleaner.
  • Page 14 Mop Pads for General Cleaning Cleaning Brush Measuring Cup Nozzles NOTE • The mop pads, batteries, exhaust filter and the pre-filter will eventually need to be replaced. Contact an LG Electronics customer service centre. Multi-Surface Nozzle Slim Hard Floor Nozzle Bedding Nozzle...

  • Page 15: Storing The Accessories

    Individually measured data would be different from a lab test result. • Battery run time is the result of using a fully charged battery according to the LG Electronics test standard. Results may be different depending on actual use environment and period of use.
  • Page 16 INSTALLATION • To detach the extension pipe, press the • To open the nozzle hooks, press on the right side. Be careful not to pinch fingers when extension pipe release button opening. Put the product body on the charging station. •...
  • Page 17 INSTALLATION Open the right door and insert the combination tool , the crevice tool and the cleaning brush for storage. NOTE • Before moving the product, unplug it and remove the vacuum cleaner, nozzles, and accessories. • To carry the product, open both doors and hold the areas shown.

  • Page 18: Operation Getting Started

    • Detach the accessories by pressing the and humidity may cause static electricity to release button accumulate on the appliance. Please contact LG Electronics customer information centre if the problem persists. • Make sure to remove any foreign object such as a sock or stocking before using the appliance.
  • Page 19 Turbo mode from Power • This indicator blinks when the appliance is mode. connecting to the LG ThinQ application or home Wi-Fi network, and the indicator lights Suction Power Down (-) Button / Wi-Fi Mode up when the connection is complete.

  • Page 20: Charging The Battery

    OPERATION Charging the Battery • Once the battery is fully recharged, 3 bars will remain lit on the battery level indicator. Before Charging the Battery • Make sure that the adapter is connected to both the charging station and the power outlet. •...

  • Page 21: Using The Mop Nozzle

    • Do not use a soiled mop pad to clean floors. • Use only authorized LG Electronics mop pads. • Empty the dust bin and clean the fine dust filter and the pre-filter after using the mop nozzle.
  • Page 22 OPERATION • If the water inlet cap is not closed properly, CAUTION water may leak. • If you use the mop nozzle for a long time with the suction off, the motor may overheat (recommended duration of use: 80 minutes). When the moter overheats, the overheating prevention function is activated and the appliance is automatically turned off.
  • Page 23 OPERATION Using with the Mop Nozzle or improperly may affect the cleaning results. Attach the water tank and mop pads to the mop nozzle. Set the water adjustment button to the STOP position. Press the Power button to start cleaning. Attach the mop nozzle to the appliance.

  • Page 24: Using The Nozzles And Tools

    OPERATION Shake the water tank to remove the remaining • Storing mop pads in a damp state can result water. in an unpleasant odour. Set the pads in a well-ventilated area out of direct sunlight for at least 24 hours or until completely dry. Using the Nozzles and Tools Leave the 2 water inlet caps open and allow the...
  • Page 25 OPERATION Crevice Tool • While cleaning, it was not intended, but pressing the PUSH button on the nozzle may remove the brush. Please attach the brush again. Use this tool to remove dust from corners or narrow spaces. • Use it for areas with static electricity such as Pet Nozzle mats.
  • Page 26 OPERATION Hard Dirt Tool • To convert back to the crevice mode, press in on the brush release button and slide the brush Firm bristles remove solidified dirt from hard surfaces. Clean up hair or foreign objects that are entangled in carpets or rugs. Adjusting the Length To adjust the length of the tool, press and hold the release button...
  • Page 27 OPERATION • The flexible hose extension cannot be used with the power drive Nozzle. Using the Kompressor Lever Use the Kompressor lever to compress hair and fibers inside the dust bin after vacuuming and before emptying the dust bin. • The vacuum must be turned off before using the Kompressor lever.

  • Page 28: Smart Functions

    • If you change your wireless router, Internet wireless router manual. service provider, or password, delete the • LG ThinQ is not responsible for any network connected appliance from the LG ThinQ connection problems or any faults, application and connect it again.
  • Page 29 Select your appliance on menu by pressing the Add a Product (+) button. Follow instructions in the LG • The wireless network name (SSID) should be a ThinQ to connect your appliance.

  • Page 30: Smart Diagnosis Function

    LG ThinQ application. RF Radiation Exposure Statement This equipment complies with radiation exposure limit (<4.0 W/kg • Launch the LG ThinQ application and select the for extremity (hand) exposure condition) set forth Smart Diagnosis feature in the menu. Follow for an uncontrolled environment.

  • Page 31: Maintenance

    MAINTENANCE MAINTENANCE Cleaning the Appliance battery from the product body and remove the foreign objects before resuming use of the appliance. Before Cleaning the Appliance • Check the inside of the product body, above the To maintain the optimum suction power, the Kompressor working plate, the extension pipe, cyclonic mesh filter, the exhaust filter and the pre- inlets, exhaust filter, pre-filter and cyclonic mesh...
  • Page 32 MAINTENANCE Remove the battery from the product body • Do not force the Kompressor lever down if before cleaning the dust bin. foreign objects are caught around the working plate of the Kompressor system. Doing so may cause product damage. Push down the Kompressor lever several times to collect and compact the dust from the...
  • Page 33 MAINTENANCE Cleaning the Filters Turn the product body over and lift the Kompressor lever up to clean the inside of the working plate with the provided cleaning Clean the exhaust filter and the pre-filter when the brush. filter cleaning icon lights up.

  • Page 34: Cleaning The Nozzles

    MAINTENANCE Lift out the pre-filter from the product body. Align the lock position of the exhaust filter cover with the letter "H" of the PUSH button on the exhaust filter. Use the combination tool to clean any dust off the motor. •...
  • Page 35 MAINTENANCE Pull the brush cover forward and pull the brush CAUTION out. • Always separate the nozzle from the product body or remove the battery before cleaning. If the nozzle starts to operate during cleaning, it could cause an injury. •...
  • Page 36 MAINTENANCE Cleaning the Slim Hard Floor • Wrap the handle of the cleaning brush with a wet towel or cloth and use it to clean the Nozzle rotating brush and nozzle. Press the nozzle release button to remove the nozzle from the extension pipe or product body.
  • Page 37 MAINTENANCE dust from the brush and the bottom of the Attach the crevice tool to the product body and nozzle. use the vacuum to remove foreign objects and dust from the bottom of the nozzle. Use a damp towel or cloth to remove any remaining foreign objects and dust from the bottom of the nozzle.

  • Page 38: Troubleshooting

    TROUBLESHOOTING TROUBLESHOOTING Before Calling for Service Operation Symptoms Possible Cause & Solution The appliance does not Battery is fully discharged. operate. • Charge the battery. Appliance is turned off. • Press the Power button to turn on the appliance. Suction power is too Dust bin is full of dust.
  • Page 39 LG customer information centre for service. repeatedly. Foreign object is in the product body, extension pipe, inlet port or nozzle.
  • Page 40 TROUBLESHOOTING Mop Nozzle Symptoms Possible Cause & Solution The mop pad Mop pads are improperly installed. attachment plate does • Remove the mop pads, clean them if necessary and attach them again. not rotate. Mop nozzle is pressed too hard against the floor. •...
  • Page 41 Your home appliance Battery is fully discharged. and smartphone are • Charge the battery, then register your appliance on LG ThinQ. not connected to the Wi-Fi network. The password for the Wi-Fi that you are trying to connect to is incorrect.
  • Page 42 Memo...
  • Page 43 Memo...
  • Page 45 This will simplify installation and ensure that the product is installed correctly and safely. Leave these instructions near the product after installation for future reference. ENGLISH VDS-ST1AU www.lg.com MFL71780904 Rev.01_060921 Copyright © 2021 LG Electronics Inc. All Rights Reserved.
  • Page 46 TABLE OF CONTENTS This manual may contain images or content that may be different from the model you purchased. This manual is subject to revision by the manufacturer. SAFETY INSTRUCTION READ ALL INSTRUCTIONS BEFORE USE............3 WARNING ......................3 CAUTION ......................9 INSTALLATION Product Overview.....................12 Installing the Charging Station ..............14 Storing the Accessories ...................16...

  • Page 47: Safety Instruction

    SAFETY INSTRUCTION SAFETY INSTRUCTION READ ALL INSTRUCTIONS BEFORE USE The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below. Safety Messages This symbol is displayed to indicate matters and operations that can cause risk.
  • Page 48 If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to an LG Electronics service centre. • Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners.
  • Page 49 SAFETY INSTRUCTION • Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury. • Do not disassemble, remove or short-circuit the battery. •...
  • Page 50 • When installing or moving the appliance, be careful not to pinch, crush, or damage the power cord or plug. Operation • This appliance is exclusively for use with the LG Electronics CordZero A9 Vacuum Cleaner. Do not use it for other appliances or other purposes.
  • Page 51 • Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug. Take it to an authorized LG Electronics service centre or dealer for assistance. • Do not apply excessive force to the power cord to bend it, or place it under a heavy object as this will damage it.
  • Page 52 • If the earth leakage breaker is tripped when the product is put on the charging station, immediately remove the appliance from the charging station. Contact an LG Electronics customer service centre. • Do not use or store a heating device or flammable substance (ether, benzene, alcohol, chemicals, combustible sprays, insecticide, air freshener or cosmetics) in close proximity to the appliance.

  • Page 53: Caution

    SAFETY INSTRUCTION • Never allow any water, beverage or detergent to get inside the battery. • Do not apply physical impacts to the battery. • Do not use the appliance without the dust bin and filters in place. Maintenance • Make sure to unplug the power cord when cleaning or maintaining the charging station.
  • Page 54 SAFETY INSTRUCTION • Do not carry the product with the Vacuum Cleaner, nozzles, or accessories inside; it may cause injury or product damage. • When opening and closing the product door or control panel, be careful not to get your fingers caught. •...
  • Page 55 SAFETY INSTRUCTION • Do not remove the battery during operation.

  • Page 56: Installation Product Overview

    INSTALLATION INSTALLATION Product Overview The images in this guide may be different from the actual components and accessories, which are subject to change by the manufacturer without prior notice for product improvement purposes. Front View List Part Name List Part Name Control Panel Motor Protection Filter (Expendable) Vacuum Cleaner Mounting Unit...
  • Page 57 Wall Fixing Anchor Product Fixing Screw Dust Bag (Expendable) NOTE • The dust bag exhaust filter and the motor Installation Kit protection filter will eventually need to be replaced. Contact an LG Electronics customer service center. Specifications Appliance Model VDS-ST1****** Dimensions...

  • Page 58: Installing The Charging Station

    INSTALLATION Installing the Charging • When storing with the mop nozzle, install the product further away from the wall. Station Installation Follow the steps below to install the charging station on a hard and level floor. CAUTION 5 cm • Do not install on carpeted floors or rugs. The product may fall, causing injury or damage.
  • Page 59 INSTALLATION • Manage and supervise children or pet animals to the fixing rack to the wall firmly using the wall prevent them from bumping into product and fixing screw. falling, or clinging to the product. • If you prefer not to install this kit immediately, Insert the nearest string into the slide knot and ensure that you keep it out of the reach of form a loop as shown in the figure.

  • Page 60: Storing The Accessories

    INSTALLATION Storage Inside CAUTION Open the left door of the product and insert • If the distance between the wall and the product the bedding nozzle or the pet nozzle is too great, the product may fall. storage. Storing the Accessories Storing the Tools Use the product to store the inlet and components provided with the vacuum cleaner.
  • Page 61 INSTALLATION • To carry the product, open both doors and hold the areas shown.

  • Page 62: Operation

    OPERATION OPERATION Charging the Battery To insert, align the battery with the outline of the battery charger. Before Charging the Battery • Make sure that the adapter is connected to both the charging station and the power outlet. • Fully charging a single battery usually takes 4 hours.

  • Page 63: Getting Started

    OPERATION Getting Started Control Panel Features Control Panel List Descriptions Status Display The display shows the dust emptying operation status or when to replace the dust bag, charging status of the spare battery, and dust emptying mode. Start Press the Start/Stop button once to start the dust emptying operation. •...
  • Page 64 OPERATION Status Display AUTO List Descriptions Dust Emptying • Indicates the dust emptying operation status or when to replace the (Replace Bag) dust bag. Indicator - White: Product is emptying dust. - Flashing red: If the indicator flashes red while emptying dust, this indicates dust bag requires replacement.
  • Page 65 OPERATION Using the Product Using the Auto Mode When the automatic dust emptying mode is set, Using the Manual Mode the dust emptying operation starts automatically whenever the vacuum cleaner is properly inserted Insert the vacuum cleaner into the product. into the product.
  • Page 66 OPERATION CAUTION • Once power is restored, product will reset and then product can be removed from emptying station. NOTE • The sound of the high-performance motor may be louder than the existing wireless vacuum cleaner. It is normal to hear sounds such as the vacuum cleaner, dust bin cover opening, product operating unit, and suction.

  • Page 67: Maintenance

    MAINTENANCE MAINTENANCE Cleaning the Appliance Changing the Dust Bag Cleaning the Product Body Open the left and right doors of the component storage. Disconnect the power plug from the outlet. Wipe the control panel using a soft cloth. • Product may malfunction if there is dust on the control panel.
  • Page 68 MAINTENANCE Press button above the PUSH label with Place the end of the dust bag on the rail inside one hand. The dust bag is released. the product. Pull out the dust bag lever to remove the Slide the dust bag in along the rails of the dust bag.
  • Page 69 • Replace the dust bag if it smells, even if it is not full. • The motor protection filter will eventually need to be replaced. Contact an LG Electronics customer service centre. Hold the product with one hand and take out Cleaning the Filters the motor protection filter with the other hand.
  • Page 70 MAINTENANCE Remove dust from the motor protection filter and exhaust filter once every 3 months and wash it using room temperature water. • To avoid odor and the malfunction of the motor, allow the motor protection filter and the exhaust filter to dry completely in a well- ventilated area out of direct sunlight for at least 24 hours before reassembling.

  • Page 71: Troubleshooting

    Product setting The internal motor of the product is not operating properly . initialization doesn't • Disconnect the power plug from the outlet and contact an LG Electronics work even after the Service Centre. power plug is plugged in again.
  • Page 72 Two icons [dust The motor that holds the Vacuum Cleaner isn't working properly. emptying (replace bag) • Disconnect the power plug from the outlet and contact an LG Electronics and auxiliary battery] Service Centre. flash simultaneously.
  • Page 73 The motor that presses the Vacuum Cleaner dust bin cover separation battery and auto button isn't working properly. emptying) flash • Disconnect the power plug from the outlet and contact an LG Electronics simultaneously. Service Centre. During the dust The dust bag is full.
  • Page 74 Memo...
  • Page 75 Memo...

This manual is also suitable for:

A9t-auto

Table of Contents