Table of Contents
Advertisement
Find the reason of an internal failure
,QGLFDWHG UHVXOW
3RVVLEOH UHDVRQ
MPM-modWarning =
There is a problem
Warning
with:
•
•
zation.
ADC-module = OK
No problem detected.
ADC-module = Fail
The A/D conversion
module has failed.
Slot04BIM1 = Fail
I/O module has failed.
(Example data, see
following section for
details)
RealTimeClock = OK
No problem detected.
RealTimeClock =
The real time clock has
Warning
been reset.
TimeSync = OK
No problem detected.
TimeSync = Warning
No time synchroniza-
tion.
3URSRVHG DFWLRQ
Set the clock.
If the problem persists, contact your ABB
the real time clock.
representative for service.
the time synchroni-
None.
Contact your ABB representative for ser-
vice.
Check that the I/O module has been config-
ured and connected to the IOP1- block.
If the problem persists, contact your ABB
representative for service.
None.
Set the clock.
None.
Check the synchronization source for prob-
lems.
If the problem persists, contact your ABB
representative for service.
&KDSWHU
9LHZ WKH WHUPLQDO XQLW VWDWXV
75
Advertisement
Table of Contents
