Table of Contents
Advertisement
Installation (Cont.)
Assembling the Base Stands
If you want to use the TV standing on appropriate furniture, first find a suitable location
where you can attach the TV base stands to the body of the TV. You will need to
arrange a soft cloth that is large enough to cover the entire front panel of the TV (for
protection of the LCD screen), as well as a screwdriver to attach the base stands.
Before using the TV, install the stands as described below, or if you want to mount it to
a wall, see page 16 for mounting advice; the wall mount (bracket) itself is not supplied.
Make sure the TV is unplugged from the power supply before installing or removing
Attaching the Stand
Step 1
Place a soft cushioned material on top of a flat
surface to prevent damaging the screen panel.
Then place the TV screen flat on top, with the
screen side facing down, as illustrated on the
right (Fig 1).
Step 2
Align the stand base to the installation point,
as illustrated on the right (Fig 2).
Step 3
Tighten the screws (supplied) with a
screwdriver to affix the stand to the panel, as
illustrated on the right (Fig 3).
CAUTION!
•
Do not apply excessive force as this may
damage the screw holes.
•
Unplug the power plug first when
installing or removing the TV Stand.
•
To avoid any damage to this TV, we
recommend you ask someone to help
with installation and/or removal of the
stand.
After Sales Support
Telephone:
Email:
IMPORTANT!
the base stands.
1300 886 649
info@tempo.org
Fig 1
Fig 2
Fig 3
15
Advertisement
Table of Contents
