Install the Conference Phone in Daisy Chain Mode
The USB-C cable for the power adapter is thinner than the USB-C cables that connect to the phone.
Procedure
Step 1
Plug the power adapter into the electrical outlet.
Step 2
Connect the short, thinner USB-C cable from the power adapter to the Smart Adapter.
Figure 8: Smart Adapter USB Port Connected to the Power Outlet
Step 3
Required: Connect the Ethernet cable to the Smart Adapter and the LAN port.
Figure 9: Smart Adapter LAN Port Connected to the LAN Port on the Wall Outlet
Step 4
Connect the first phone to the Smart Adapter using the longer, thicker USB-C cable.
Step 5
Connect the second phone to the Smart Adapter using a USB-C cable.
The following figure shows installation of the conference phone in daisy chain mode.
Cisco IP Conference Phone 8832 User Guide
12
Your Phone