Philips 27E1N5300AE User Manual page 11

Note
• MPRT: To reduce motion blur, LED
backlight will strobe synchronously
with screen refresh, which may
cause noticeable brightness change.
• 75Hz refresh rate or higher is re-
quired for MPRT.
• AMD FreeSync
be enabled simultaneously.
• MPRT is to adjust brightness for blur
reduction, so cannot adjust bright-
ness while MPRT is turned on.
• MPRT is gaming-optimized mode.
Turn on MPRT may cause noticeable
screen flickering. It is recommended
to turn off when you are not using
the gaming function.
• This Philips monitor is certified with
AMD FreeSync™ . The technology
is used to match the refresh rate
of the monitor to the graphic
cards. Providing the smoothest
gaming experience by reducing or
eliminating judder, tearing, and
stuttering.
Enabling Adaptive-Sync from
the On-Screen Display menu
will automatically activate the
appropriate technology depending
on the graphics card installed in your
computer:
• If using an AMD Radeon graphics
card, FreeSync will be enabled.
• Go to www.philips.com/support
to download the latest version of
leaflet to get more information on
FreeSync certification.
and MPRT cannot
TM
3 Resolution notification
This monitor is designed for optimal
performance at its native resolution,
1920 x 1080. When the monitor is
powered on at a different resolution, an
alert is displayed on screen: Use 1920 x
1080 for best results.
Display of the native resolution alert can
be switched off from Setup in the OSD
(On Screen Display) menu.
Physical Function
4
Tilt
Height adjustment
9
20°
-5°
130mm