Instructions For Use; Power Supply And Input Voltage; Connection Points; Wiring Diagram - Bosch Rexroth IndraDrive HMD01 Operating Instructions Manual

DOK-INDRV*-HMD01******-IT01-EN-P
Rexroth IndraDrive Drive Controllers Power Sections HMD01
5

Instructions for Use

5.1

Power Supply and Input Voltage

5.2

Connection Points

5.2.1

Wiring Diagram

Power sections HMS and HMD are only to be used in conjunction with listed
(NMMS) DC power supply units like HMV, which are capable of delivering the
rated input current for the applicable power section. Branch circuit protection
has to be provided externally according to the maximum values (voltage and
current), which are mentioned in the supply unit manual (Project Planning
Manual).
Supply unit = HMV01
Power section = HMD01
The components marked with gray background color are absolutely
necessary.
1) Optional for infeeding supply units; required for regenerative supply
units
2) Mains filter to be used optionally and depending on the EMC require‐
ments
Fig.5-1: Drive System Rexroth IndraDrive M
Bosch Rexroth AG 29/67
Instructions for Use