Multiclient Integrated Kvm - Philips 27E2F7901 User Manual

2.3 MultiClient Integrated KVM

What is it?
1
With MultiClient Integrated KVM switch, you can control two separate PCs with one
monitor-keyboard-mouse set up.
How to enable MultiClient Integrated KVM
2
With the built-in MultiClient Integrated KVM, Philips monitor allows to quickly switch
your peripherals back and forth between in two devices through the OSD menu
setting.
Use USBC and HDMI or DP as input, then use USB C as USB upstream
Please follow the steps for the settings.
1. Connect the USB upstream cables from your dual devices to the"USB C" and "USB
up" port of this monitor at the same time.
Source
HDMI or DP
USB C (USBC1)
2. Connect peripherals to the USB downstream port of this monitor.
1
OR
USB C-A Cable
USBC2
(DATA)
PC1
3. Enter to OSD menu. Go to KVM layer and select "Auto", "USB C" or "USB up" to
switch the control of peripherals from one device to another. Simply repeat this
step for switching the control system using one set of peripheral.
USB Upstream
USB up (USBC2)
USB C (USBC1)
2


 
 

1
USBC1
USB C-C Cable
PC2

 
    
 

10