GE Multilin GEK-113328A Instruction Manual page 111

3 HUMAN INTERFACES. SETTINGS & ACTUAL VALUES
3.2.5.11 SELECT MAIN SCREEN
The relay display offers the possibility to select the default main screen. For this purpose, the user must access the "Select
Main Screen" menu through the HMI. This menu includes the following options:
Logotype
This option selects as main screen the relay logotype including the firmware and boot code versions, the relay model and
the communication parameters for local port COM2.
Metering
This option shows a Metering screen including the phase and ground currents as well as phase-to-phase voltage, and zero
sequence voltage values, all of them in primary values.
All
This option alternates in time the two previous options.
GEK-113328A
G650 3.74 (4.10)
General Electric
G650MCDF2G1HIR
19200N81: MODBUS: 254
Figure 3–24: DEFAULT LOGOTYPE SCREEN
Ia 0.000 Vab 0.000
Ib 0.000 Vbc 0.000
Ic 0.000 Vca 0.000
Ig 0.000 V0
Figure 3–25: DEFAULT METERING SCREEN
G650 Generator Protection & Control System
3.2 HUMAN MACHINE INTERFACE (HMI)
0.000
3
3-51