Table of Contents
Advertisement
Section 3 - Configuration
WAN settings are only used in the WISP Client Router wireless mode and the WISP Repeater wireless mode. Choose Dynamic
IP(DHCP) to obtain IP Address information automatically from your ISP. Select this option if your ISP does not give you any IP
number to use. This option is commonly used for Cable modem services.
Host Name:
The Host Name is optional but may be required
by some ISPs.
MTU Size:
You may need to change the MTU (Maximum
Transmission Unit) for optimal performance
with your specific ISP. The default MTU size is
1500.
Attain DNS
Select this option if you want the DAP-1360 to
Automatically:
get the DNS (Domain Name System) server IP
address automatically.
Set DNS manually:
Select this option if you want to manually enter
the DNS Server IP address(es). The fields to
enter the Primary and Secondary DNS server
IP addresses will appear after you have selected this option.
DNS Server:
Enter the Primary and Secondary DNS server IP address assigned by your ISP.
Clone MAC Address:
The default MAC address is set to the Ethernet MAC address your DAP-1360. You can click the Clone Your PC's MAC Address button
to replace the AP's MAC address with the MAC address of the PC that you used to register with your ISP. It is not recommended
that you change the default MAC address unless required by your ISP.
D-Link DAP-1360 User Manual
WAN Settings
Dynamic IP (DHCP)
42
Advertisement
Chapters
Table of Contents
