Advertisement
UNPACKING / DESCRIPTION
WARNING:
!
Your tool should NEVER be connected to the power source
when you are assembling parts, making adjustments, installing or removing
grinder discs, cleaning or when it is not in use. Disconnecting the tool will
prevent accidental starting, which could cause serious personal injury.
1. Remove the grinder from the carton and inspect it carefully to make sure
that no breakage or damage has occurred during shipping.
2. Do not discard any of the packing materials until all parts are accounted for.
3. One grinding disc is included.
4. If any of the parts are damaged or missing (refer to PARTS LIST below), return the
grinder for replacement to the retailer from which it was purchased.
PARTS LIST (Fig. 1)
NOTE
: Always refer back to these PARTS LIST numbers for product call-outs
and operation reference.
1. On-Off Switch
2.
2. Auxiliary Handle
3. Spindle Lock Button
4. Decoration Ring
5. Outer Flange
6. Inner Flange
7. Spindle
8. Grinding Disc
9. Spanner
10. Grinding Disc Guard
11. Clamping Screw
12. Coded Projection
5.
6.
7.
9.
10.
11.
12.
9
3.
1.
4.
8.
INCLUDED ACCESSORIES
- Spanner
- Auxiliary Handle
- Grinding Disc Guard
- Grinding Disc
TECHNICAL DATA
Rated Voltage
Rated Power Input
No Load Speed
Diameter Of Grinding Discs
Disc Size
Disc Bore
Spindle Thread
Machinery Weight
Protection Degree
Cord Length
10
120 V ~ 60 Hz
6.5A
11000/min
115mm
4 -1/2''
7/8''
5/8''- 11
4.4 lb / 2.0 kg
/ II
10 ft.
Advertisement
