Inner Finisher-L1 And Inner 2/3 Hole Puncher-D1 - Canon imageRUNNER ADVANCE DX C5870i Manual

Canon

7.7 Inner Finisher-L1 and Inner 2/3 Hole Puncher-D1

Restricted Equipment
Paper
Specifications
Capacity Per Tray (Upper)
Capacity Per Tray (Lower)
14 For more details on supported paper weights and types, see
23 Based on 20 lb bond (80 g/m
Revision 6 imageRUNNER ADVANCE DX C5800 Series Customer Expectations Document
imageRUNNER ADVANCE DX C5800 Series Customer Expectations Document
Item
Inner Finisher-L1 cannot be installed with Inner 2-Way Tray-M1 or
Staple Finisher-AB2/Booklet Finisher-A1 with Tri-Fold
Inner Finisher-L1 and 2/3 Hole Puncher-D1 cannot be installed on
the imageRUNNER ADVANCE DX C5870i
12" x 18", 11" x 17", LGL, LTR, LTRR, STMT, STMTR, EXEC,
Size
Custom Size (3 7/8" x 5 1/2", to 12 5/8" x 18"), and Envelopes
Weight 14 lb bond to 110 lb cover (52 to 300 g/m
14
Thin, Plain, Recycled, Color, Pre-Punched, Bond, Tab, Heavy,
Type
Tracing, Coated, Labels, Transparencies, and Envelopes
No Finishing Modes, Collate and Group Modes Set
No Finishing Modes, Collate and Group Modes Set
Collate + Offset and Group + Offset Modes Set
23
Staple (Corner/Double) Mode Set
Staple (Staple-Free) Mode Set
2 ) paper. The capacity may vary, when other paper weights are used.
45 sheets (or 1/4" (5.2 mm) in height)
LTR, EXEC, STMT and STMTR:
500 sheets (or 2 1/8" (52 mm) in height)
12 5/8" x 17 11/16, 12" x 18", 11" x 17", LGL and LTRR:
250 sheets (or 1 1/16" (26 mm) in height)
With Different Paper Sizes:
250 sheets (or 1 1/16" (26 mm) in height)
LTR, EXEC:
500 sheets (or 2 1/8" (52 mm) in height)
11" x 17", LGL and LTRR:
250 sheets (or 1 1/16" (26 mm) in height)
11" x 17", LGL, LTR, LTRR, EXEC:
30 sets (or 1 1/16" (26 mm) in height)
LTR:
30 sets (or 2 1/8" (52 mm) in height)
11" x 17": 30 sets (or 1 1/16" (26 mm) in height)
"Media Feed Locations,"
Specifications
)
2
on p. 92.
Page 58