Mitsubishi Electric LX-005TD Instruction Manual page 8

(2) Detail of mounting of tension detector ( when using LX-PLT of LX-TD type option ).
When the optional LX-PLT is purchased, LX-PLT fitting bolts are furnished.
However, the pillow block, hexagon socket head bolts and others are to be prepared by user.
Optional plate fitting bolt
• LX-005 to LX-050TD
M6, four furnished, tightening torque 15N
• LX-100TD, LX-200TD
M8, four furnished, tightening torque 35N
Pillow block fitting hexagon bolt
• LX-005 to LX-050TD - - - - M10, two
• LX-005 to LX-050TD - - - - M12, two
(3) Detail of mounting of tension detector ( example of LX-TD type wall mount ).
Tension detector fitting bolt
Length of fitting bolt
should be 10mm or
less from the housing
surface of the detector
side.
Pillow block
Hexagon nut
m
•
m
•
6
Tension detector