Timer Function - Silvercrest SLE 320 D5 Short Manual

FAN FUNCTION
No dehumidification takes place in this programme. The room air is drawn in
through the air inlet, passes through the filter 8 and is discharged back into the
room via the air outlet.
♦ Press the
The LEDs
AUTOMATIC
With this programme, the following functions are automatically activated or
deactivated depending on the respective humidity in the room:
Humidity
> 70%
55‒70%
< 55%

Timer function

The appliance is equipped with a timer function that can be used with any one
of the 4 programmes. One of 24 switch-off times, ranging from 1 to 24 hours,
can be selected. Once the set time has elapsed, the appliance switches off
permanently.
♦ Press the
lights up, and
♦ Press the
time from 1 to 24 hours. The selected switch-off time flashes on the dis-
play t for approx. 5 seconds and then the current relative humidity value
is displayed again.
♦ To end the timer prematurely, press the
TIMER LED f goes out and the display t shows the current relative
humidity value.
SLE 320 D5
FAN SPEED button e to select the desired fan level.
g (ype) and h (high) indicate which fan level is set.
Dehumidification
On
On
Off
TIMER button r during operation. The
flashes on the display t.
UP arrow z or the
Fan speed: High
Fan speed: Low
Fan speed: Low
TIMER LED f
DOWN arrow u to set a switch-off
TIMER button r twice. The
GB │ IE
Fan
│ 15 ■