Table of Contents
Advertisement
Run wash cycle
Washing cycle finished/Removing the washing
The washing program is completed when the ON/OFF button display
lamp goes out.
After a RINSE HOLD the water must first be pumped out or the washing
spun:
0 Either turn the program selector clockwise to SPIN (washing is spun in
accordance with the program which has just run),
or
turn the program selector clockwise to PUMP OUT (water is pumped
out).
0 Open the door.
0 Remove the washing.
0 Switch off the washing machine by pressing the ON/OFF button.
0 Close the water tap.
0 Pull the detergent compartment out a little so that it can dry. Only lean
the door to so that the washing machine can get some air.
24
Advertisement
Table of Contents
