7. OPERATIONAL AND FUNCTIONAL DESCRIPTION
TLEDON1(msec)
TLEDON2(msec)
TLEDON3(msec)
After LED has been lit, change of TUP becomes available from 1AH register at an address (to be described
later) of I
[5] Delay in LED current change
S1F76680 allows providing delay to the LED current change waveform and thus realizing a smoother
current change by connecting the capacitor CLED to CLED pin. Connection of CLED=1µF is
recommended.
LED current change waveform
12
Downloaded from
Elcodis.com
electronic components distributor
When SAMPL=H
(Pull up)
Max. 1180msec+TUP
2
C-Bus.
SAMPL=L
Max. 5msec+TUP
Max. 2360msec+TUP
Max. 2100msec
CLED connect
EPSON
Remarks
TUP is selected from the current
change time setting table
(No.P11)
CLED=1.0µF
ILED 0%→90%,NLED=127
S1F76680 Technical Manual (Rev.1.22)