Advertisement
Removal and reinstallation of the front cover
Reinstallation of the front covers
(a)
(a)
Insert the upper hooks of the front cover (upper side) into the sockets of the inverter.
Securely install the front cover (upper side) to the inverter by fixing the hooks on the sides of the cover into place.
(b)
Tighten the mounting screw at the lower part of the front cover (upper side).
(c)
Fasten the front cover (lower side) with the mounting screws. (The number of the mounting screws differs by the capacity.)
NOTE
• Fully make sure that the front covers are installed securely. Always tighten the mounting screws of the front covers.
16
INSTALLATION AND WIRING
(b)
Fasten
Fasten
Fasten
(c)
Fasten
Fasten
Fasten
Advertisement
