Prerequisites
Purpose
This document contains additional information on how to remount the collimator on a
MOBILETT Plus/ Plus E/ Plus M/ Plus HP.
Components / documents
The remounting changes comprise the following parts:
Part no. Quantity Part no.
1
2
Tools / documents required
•
Standard installation tools
•
"Service Instructions", SPR8-220.061.01... or SPR8-215.898/061.01...
Time required
•
Approximately 5 minutes for one customer support engineer
Safety information
CAUTION
Siemens-Elema AB
Solna, Sweden
4
60 89 593
1
66 08 116
Be sure to unplug the unit from the mains or turn off
the main circuit breaker before performing any service.
Remove or install boards only when the generator is
switched OFF. Adhere to the ESD guidelines.
Checks and adjustments performed with radiation ON
are identified by the radiation warning symbol
During these types of adjustments, radiation protective
clothing must be worn.
Observe all MOBILETT safety guidelines.
Name
Cable ties
This instruction
SPR8-220.092.02
Rev. 01
08.01
1
.
Page 1 of 2 MOBILETT Plus/ -E/ -M/ -HP
SPS-UD
1 - 1
1
1
1
1
1
Service