HP EliteDesk 800 G3 SFF Hardware Reference Manual page 33
Hide thumbs
Also See for EliteDesk 800 G3 SFF:
- Maintenance and service manual (165 pages) ,
- Disassembly instructions manual (11 pages) ,
- Quick start manual (2 pages)
Advertisement
8.
Pull the release lever next to the rear of the hard drive outward (1). While pulling the release lever out,
lift the rear of the drive up (2), and then slide the front of the drive back and lift it out of the bay (3).
9.
Remove the four mounting screws (two on each side) from the old drive. You will need these screws if
you install a new drive.
Removing and installing drives
27
Advertisement
