Initial System Setup - LG S94T1-S Service Manual

When you turn on the unit for the fi rst time, the initial setup wizard appears on the screen. Set the display lan-
guage and network settings on the initial setup wizard.
1. Press (POWER).
The initial setup wizard appears on the screen.
2. Use / / / to select a display language and
press ENTER ( ).
3. Read and prepare the preparations for the network
settings and then press ENTER ( ) while [Start] is
highlighted.
If wired network is connected, the network connec-
tion setting will automatically be fi nished.
4. All available networks are displayed on the screen.
Use / to select [Wired Network] or desired SSID
of wireless network and press ENTER ( ).
If you have security on your access point, you need
to input the security code as necessary.

INITIAL SYSTEM SETUP

1-5
5. Use / / / to select the IP mode between [Dy-
namic] and [Static]. Normally, select [Dynamic] to al-
locate an IP address automatically.
6. Select [Next] and press ENTER ( ) to apply net-
work settings.
Network connection status is displayed on the
screen. For details on network settings, refer to O/M
"Connecting to your Home Network".
7. Select [Next] and press ENTER ( ).
8. Press ENTER ( ) to verify the test tone signals
ofthe speakers.
After verifying the test tone signals, press ENTER
( ) while [Stop] is highlighted. Select [Next] and
press ENTER ( ).