Wireless Options; Maintenance - Dell OptiPlex 5080 Small Form Factor Setup And Specifications Manual

Table 29. Virtualization Support (continued)
Option
Trusted Execution

Wireless options

Table 30. Wireless
Option
Wireless Device Enable

Maintenance

Table 31. Maintenance
Option
Service Tag
Asset Tag
SERR Messages
BIOS Downgrade
Data Wipe
BIOS Recovery
First Power On Date
Description
• Enable VT for Direct I/O
This option is set by default.
This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the additional
hardware capabilities provided by Intel Trusted Execution Technology.
• Trusted Execution
This option is not set by default.
Description
Displays the service tag of your computer.
Allows you to create a system asset tag if an asset tag is not already set.
This option is not set by default.
Controls the SERR message mechanism. This option is set by default. Some graphics cards require that
the SERR message mechanism be disabled.
Allows you to flash previous revisions of the system firmware.
• Allow BIOS Downgrade
This option is set by default.
Allows you to securely erase data from all internal storage devices.
• Wipe on Next Boot
This option is not set by default.
BIOS Recovery from Hard Drive—This option is set by default. Allows you to recover the corrupted
BIOS from a recovery file on the HDD or an external USB key.
NOTE: BIOS Recovery from Hard Drive field must be enabled.
Always Perform Integrity Check—Performs integrity check on every boot.
Allows you the set Ownership date. The option Set Ownership Date is not set by default.
Description
Allows you to enable or disable the internal wireless devices.
The options are:
• WLAN/WiGig
• Bluetooth
All the options are enabled by default.
System setup 33