Beko GN162340XBN User Manual page 26

1. Remove the fitting from the hose end
adapter attached to the back of the
product, thread the fitting onto the wa-
ter hose.
2. Attach the water hose to the hose-end
adapter by pressing down firmly.
3. Secure the union to the hose-end ad-
apter by hand tightening. You can
tighten the union using a pipe wrench
or pliers.
Connecting to mains water
(This feature is optional)
If you are going to use the product by con-
necting it to the cold water line, you need to
install a standard 1/2" valve fitting on the
cold water network in your home. If this fit-
ting is not available and you are not sure,
consult a qualified plumber.
1. Disconnect the union from the faucet
adapter.
2. Connect the faucet adapter to the
mains line valve.
EN / 26