Sony DVW-A500P/1 Operation Manual page 156

Item number Item
K10 TC GENERATOR
EXT/INT
K11
TC GENERATOR
REGEN/PRESET
K12
REC RUN/FREE
RUN
K13 DF/NDF
(DVW-A500/1
and 500/1 only)
K14 VITC
K15 ID PRESET
K16 SUPERIMPOSED
CHARACTER
K17
VIDEO INPUT
SELECT
K18 OUTPUT
REFERENCE
SELECT
Settable range Function
[0] [internal]
Selects the time code generated by the internal or external
1 external
time cord generator.
0: Selects the time code generated by the internal time
1: Selects an external time code input to the TIME CODE
[0] [preset] Selects the time code with which the internal time code
1 regenerate generator synchronizes.
0: Presets the initial settings of the time code generated by
1: The internal time code reader synchronizes with the
[0] [free run] Selects the time code running mode.
1 rec run 0: The time code advances when the power is on
1: The time code advances only during recording.
[0] [drop frame]
Selects the running mode for the CTL counter and the time
1 non-drop frame code generator.
0: Drop frame mode (DF is displayed.)
1: Non-drop frame mode (NDF is displayed.)
[0] [on]
Specifies the recording of VITC.
1 off 0: Records VITC generated by the internal time code
1: Does not record VITC. However, records VITC inserted
For details on the VITC insertion line, refer to "4-3-10
Setting the VITC Insertion Line (VITC POS-1/POS-2)" on
page 4-26.
[0] [off] The presetting of the ID code in non-volatile memory as
1 on user bits data enables recalling and record it during later
recording sessions.
0: Records the user bits set through the control panel.
1: Records the preset ID code as user bits data.
For details on presetting ID code, refer to the item 603.
0 off Set to on to superimpose time data and operation mode
[1] [on]
indicated as character data onto the signals output from the
SERIAL V/A OUTPUT 4(SUPER) and VIDEO OUTPUT
COMPOSITE 3(SUPER) connectors.
0: Does not superimpose time data and operation mode.
1: Superimposes time data and operation mode.
[0] [sif]
Selects the video input signal.
1 composite 0: The serial digital video signal input to the SERIAL V/A
2 component(y-t/b)
1: The analog composite video signal input to the
2: The analog component video signal input to the
[0]
Selects the signal to be used as the reference signal for
ref.video
1 input video VTR operations.
0: The signal input to the REF.VIDEO connector is used as
1: The video input signal is used as the reference signal for
code generator.
IN connector.
the internal time code generator with operation through
the front panel or remote control from the device
connected to the REMOTE1-IN (9P) connector.
time code read by the internal time code reader
(regenerates the time code).
regardless of the VTR's operation mode.
When selecting this setting, set the [F6] (TCG SOURCE)
button to int, the [F7] (TCG MODE) button to prst.
generator.
in the video input signal.
INPUT connector.
COMPOSITE VIDEO INPUT connector.
COMPONENT VIDEO INPUT connectors.
the reference signal for playback and audio recording.
Digital audio and video input signals must synchronize
with this reference signal during recording.
VTR operations. The [F1] (VIDEO IN) button in the PF1
menu (factory setting)switches the video input signal.
A-39
Appendix