Product Identification - ABB 268D/V Operating Instruction

TRANSPORT
After final calibration, the instrument is packed in a carton
(Type 2 to ANSI/ASME N45.2.2-1978), intended to provide
protection from physical damage.
STORAGE
The instrument does not require any special treatment if
stored as despatched and
conditions level (Type 2 to ANSI/ASME N45.2.2-1978).
There is no limit to the storage period, although the terms of
guarantee remain as agreed with the Company and as given
in the order acknowledgement.
HANDLING
The instrument does not require any special precautions
during handling although normal good practice should be
observed.
Ref. A
Ref. D
Ref. C
Ref. D
Important - The instrument serial number must always be quoted when making enquiries.
- 4 -
within the specified ambient
DIN TYPE
HOUSING
Fig. 1 - Product identification

PRODUCT IDENTIFICATION

The instrument is identified by the data plates shown in
Figure 1.
The Nameplate (ref.A) provides information concerning the
code number, maximum process working pressure, range and
span limits, power supply and output signal. See code/
specification sheet for detailed information. This plate also
shows the transmitter serial number.
Please refer to this number when making enquiries.
A dedicated label (ref. B) is welded as standard to the primary
unit, carrying specific details of the transducer (diaphragms
material, fill fluid, range limit and identification number).
A Safety Marking plate ( ref. C) is fitted when the transmitter
is required to comply with hazardous area regulations, e.g.
flameproof or intrinsic safety protection. Additionally Tag plate
(ref. D) provides the customer tag number and calibrated
range, maximum process working pressure (PS) and tempera-
ture (TS).
The instrument may be used as a safety accessory (category
IV) as defined by the Pressure Equipment Directive 97/23/EC.
In this case, near the CE mark, there is the number of the
notified body (0474) that verified the compliance.
Nameplate
Ref. A
(Ex)
3rd and 4th numerals show
the year of construction
- - X X - - - -
BARREL TYPE
HOUSING
Primary Unit
Ref. B
FILL
FLUID
DIAPHRAGM
MATERIAL
SERIAL
NUMBER
URL