Sealey SA684 Instructions

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE
PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL
INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
 Follow all workshop safety rules, regulations, and conditions when using wrench.
 WARNING! Disconnect from air supply before changing accessories or servicing.
 Maintain the wrench in good condition and replace any damaged or worn parts. Use
genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
 WARNING! Check correct air pressure is maintained and not exceeded. We recommend 90psi.
 Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each
use and ensure that all connections are secure.
 Only use impact sockets which are specifically designed for use with an impact wrench.
 Wear approved safety eye/face shield, ear defenders and hand protection.
 WARNING! Due to the possible presence of asbestos dust from brake linings, when working
around vehicle brake systems we recommend you wear suitable respiratory protection.
 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
 Keep children and non essential persons away from the working area.
 DO NOT use the wrench for a task it is not designed to perform.
 WARNING! DO NOT use wrench if damaged or thought to be faulty. (Contact Service Agent).
 DO NOT use wrench unless you have been instructed in its use by a qualified person.
 DO NOT carry the wrench by the air hose, or yank the hose from the air supply.
 DO NOT operate wrench if you are tired or under the influence of alcohol, drugs or intoxicating
medication.
 DO NOT carry wrench with your hand on the power trigger in order to avoid unintentional starting.
 DO NOT direct air from the air hose at yourself or others.
 When not in use disconnect from air supply and store in a safe, dry, childproof location.
2. INTRODUCTION & SPECIFICATION
Super-duty 1"Sq drive pistol grip air impact wrench suitable for
commercial and agricultural vehicle use. Pin clutch mechanism
gives high power-to-weight ratio. Fitted with long
anvil for areas with restricted access.
Three-position torque control with reverse.
Supplied with side handle and spring balance
hoop.
Drive size . . . . . . . . . . . . . . . . . . . . 1"
Working/Max torque . . 1400/1600lb.ft
Ultimate torque . . . . . . . . . . 1800lb.ft
Speed . . . . . . . . . . . . . . . . . . 3400rpm
Air consumption . . . . . . . . . . . . 12cfm
Operating pressure. . . . . . . . . . .90psi
INSTRUCTIONS FOR:
AIR IMPACT WRENCH PISTOL
SUPER-DUTY LONG ANVIL
MODEL No:
Air inlet size . . . . . . . . . . . . . 1/2"BSP
Weight . . . . . . . . . . . . . . . . . . .11.1kg
Sound Pressure . . . . . . . . . . . 87dB.A
Vibration . . . . . . . . . . . . . . . . . 5.9m/s²
Original Language Version
SA684
SA684 Issue: 3 - 12/12/11