Table of Contents
Advertisement
Figure 37
1. Cotter pin
2. Nut retainer
9.
Install the cotter pin and bend each legs around
the retainer
(Figure
10.
Install the dust cap onto the hub
11.
Repeat steps
1
through
at the other side of the machine.
Installing the Brakes and Wheels
1.
Clean the 2 flange-head bolts (3/8 x 3/4 inch)
and apply a coat of anti-seize compound to the
threads of the bolts.
2.
Align the brake pads to either side of the rotor
(Figure
32) and the holes in the caliper bracket
with the holes in the brake mount of the spindle
frame
(Figure
36).
3.
Assemble the caliper bracket to the spindle
frame
(Figure
32) with the 2 flange-head bolts
(3/8 x 3/4 inch), and torque the bolts to 47 to 54
N∙m (35 to 40 ft-lb).
4.
Align the holes in the wheel to the studs of the
hub and assemble the wheel to the hub with the
valve stem outward
Note:
Ensure that the mounting surface of the
wheel is flush with the hub.
5.
Secure the wheel to the hub with the lug nuts
(Figure
31), and torque the nuts to 108 to 122
N∙m (80 to 90 ft-lb).
6.
Repeat steps
1
through
wheel at the other side of the machine.
All manuals and user guides at all-guides.com
3. Dust cap
37).
(Figure
37).
10
for the hub and rotor
(Figure
31).
5
for the brake and
g192345
34
Advertisement
Table of Contents
