Table of Contents
Advertisement
1
Right-click on the computer's desktop and choose Use as monitor from the shortcut
menu. In the displayed dialog box, turn on the switch for this feature.
2
Use a USB-C to USB-C cable that supports USB 3.2 Gen 1, DP1.2, and later protocols to
connect the computer to a device such as a computer or laptop. (The USB-C ports must
support display, data transmission, and charging.)
To exit Use as monitor, remove the USB-C to USB-C cable.
When there is an external input source for displaying content, you can press F1 and F2
•
to adjust the screen brightness and press F4, F5, and F6 to adjust the volume. The
touch control, camera, microphone, and headset ports of the device will be unavailable
and colors cannot be adjusted.
With Use as monitor enabled, you can perform the above operations to connect a
•
laptop, phone, or tablet to the computer and use the keyboard and mouse to control
the laptop, phone, and tablet. (Third-party keyboards and mouses do not support
reverse controls.)
Use as monitor will be unavailable if HUAWEI PC Manager is closed or uninstalled.
•
Eye Comfort mode
Enable Eye Comfort mode when using the computer for prolonged periods to prevent eye
strain and fatigue.
Right-click any empty space on the desktop, click
The screen will have a slightly yellow hue when Eye Comfort mode is enabled.
F10 factory reset (not available in some regions)
The computer's built-in F10 factory reset feature can quickly restore your computer to its
initial or factory state.
, and enable Eye Comfort.
Highlighted features
10
Advertisement
Table of Contents
