Product Assembly; Product Usage - KitchenAid 5KCG8433 Owner's Manual

Hide thumbs Also See for 5KCG8433:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

PRODUCT ASSEMBLY

First, clean all parts and accessories. (See "Care and Cleaning" section). Place the product on
a dry, flat, level surface such as a countertop or table.
1.
Place the Top Hopper onto the machine with the "Lock Icon" facing front. Rotate the Top
Hopper until it clicks into place.
Add whole coffee beans. Place the Top Hopper Lid onto the Top Hopper.
2.
For grinding into the Bottom Hopper: Open the Rubber Stopper and slide the Bottom
Hopper into position.
3.
For grinding into a Portafilter: Remove the Grounds Catcher Tray and then remove the
Portafilter Holder from its storage location. Insert Portafilter Holder into Portafilter Holder
Guide.
Replace the Grounds Catcher Tray.
4.
For grinding into the Portafilter: If using a standard residential Portafilter (54 mm), insert
it along the top guides of the Portafilter Holder.
5.
For grinding into the Portafilter: If using a commercial Portafilter (58 mm), insert it into
the middle guides of Portafilter Holder.

PRODUCT USAGE

1.
Select Grind Size: Refer to the Brew method icons on the machine. Rotate the Grind Size
Knob to select a grind size ( ) within the brew method range you are using. The selected
grind size will be shown on the display.
NOTE: As grind size number increases the actual grind size decreases (1 is Coarse and
70 is fine).
2.
Select Coffee Dose: Rotate the Dose Selection Knob for the number of cups or
shots (
).
French press (
Espresso (
3.
To start grinding: Press Start/Stop (
automatically when the time reaches 0 on the display.
4.
To pause during grinding: Press Start/Stop (
Start/Stop (
NOTE: Grinder can remain paused for up to 15 seconds. After 15 seconds, the cycle will
cancel and display will show the current selection.
5.
To cancel the grinding cycle: Press and hold Start/Stop (
6.
To change coffee amount for a dose: If desired, rotate the Time Adjustment Knob to
customise the desired amount of coffee for a particular selected dose. Increase the
grinding time ( ) to increase the coffee ground amount or decrease the grinding time to
decrease the coffee ground amount.
TIP: If Grind Size Knob is hard to rotate, run the machine while adjusting the size to remove
any coffee grounds caught between the burrs.
), Percolation (
): Select between 1 - 2 shots.
).
), Drip coffee (
): Select between 1 - 12 cups.
) to begin grinding. Grinder will stop
) to pause. To resume grinding press
) for 3 seconds.
5

Advertisement

Table of Contents
loading

Table of Contents