Step 13
(Optional) To enable waterproof operation better, it is recommended that you use Teflon tape to cover the threads
before installation. You may also wish to use silicon sealant to acheive further protection from ingress of liquid.
Step 14
Connect the RJ45 Cable to the power injector.
a) Insert the RJ45 cable into the RJ45 socket at the power injector.
b) Screw the LTGC body onto the power injector and tighten the LTGC body with torque 40-45 in. lbs.(4.5-5.1 Nm).
c) Push the split gland into the LTGC body.
d) Tighten the sealing nut with torque 50-55 in. lbs.(56-62 Nm).
8