Connecting Ice Maker To Water Supply - Honeywell H18TFW User Manual

16 Connect wiring harness to water valve. Make sure connection is tight.
17 Push plastic water supply tubing into the bottom of the water valve as far
as it will go. Manually tighten the nylon nut onto the threaded end of the water
valve. Tighten another one half turn with wrench. DO NOT over tighten.
18 Secure plastic water tubing to the rear of the cabinet with two
plastic clamps.
NOTE: Clean the back of the cabinet with a commercial household cleaner,
ammonia or alcohol before applying clamps.

2.8 Connecting Ice Maker to Water Supply

To eliminate the danger of electric shock during installation, you must unplug the
refrigerator from its electrical outlet.
IMPORTANT: Ensure that your water supply line connections comply with all local
plumbing codes.
Wiring Harness
Nylon Nut
Plastic Water
Tubing
Plastic
Clamp
Water Valve
12