Table of Contents
Advertisement
Appendix
Product Specifications
Printing Specifications
Printing method
Dot density
Paper feed
Paper width
Printing width
The number of characters
Maximum print speed
Line spacing
dpi: dots per inch
• The print speed changes automatically depending on the applied voltage, head temperature, and
• The maximum print speed may not be reached depending on the data transmission conditions
• When the printing speed fluctuates or intermittent printing occurs due to data transmission
• The image quality of barcodes may be degraded depending on the paper you are using. Please
• Liner-free label paper using adhesive may cause disturbance in the paper feed pitch due to
Thermal line printing
0.125 x 0.125 mm/dot (203 x 203 dpi)
Frictional feeding
40 mm
35 mm {1.38"},
280 dots
Font A
23
Font B
31
• Up to 170 mm/s
• Up to 90 mm/s when printing ladder barcodes or two-dimensional symbols
• Up to 25 mm/s when Number of head energizing parts is set to 4 divisions.
3.75 mm {1/5"}
print density.
and combination of commands.
conditions, variations in print density or white streaks may occur.
print in advance to check if there is any problem with the quality of the barcode. If there is a
problem, reduce the printing speed (recommended: 90mm/s) or increase the size (module size) to
ensure the barcode quality.
changes in the peeling force of the paper from the roll paper. If you use such label paper, please
check for any problems beforehand.
58 mm
52.5 mm {2.07"},
72.0 mm {2.83"},
420 dots
42 (42 characters mode)
35
48 (standard characters mode)
55 (42 characters mode)
46
64 (standard characters mode)
Appendix
80 mm
576 dots
119
Advertisement
Table of Contents
