Download Print this page

Advertisement

Quick Links

INSTALLATION MANUAL ECONOMIZER
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
Always comply with the following precautions to avoid dangerous
situations and ensure peak performance of your product.
WARNING
!
It can result in serious injury or death when the directions are
ignored.
CAUTION
!
It can result in minor injury or product damage when the directions
are ignored.
WARNING
!
• Installation or repairs made by unqualified persons can result in
hazards to you and others.
• Installation MUST conform with local building codes or, in the
absence of local codes.
• The information contained in the manual is intended for use by a
qualified service technician familiar with safety procedures and
equipped with the proper tools and test instruments.
• Failure to carefully read and follow all instructions in this manual
can result in equipment malfunction, property damage, personal
injury and/or death.
Installation
• For installation, always contact the dealer or an authorized service
center.
- There is risk of fire, electric shock, explosion, or injury.
• Do not install, remove, or re-install the unit by yourself (customer).
- There is risk of fire, electric shock, explosion, or injury.
• Be cautious when unpacking and installing the product.
- Sharp edges could cause injury.
• Do not open the maintenance cover of the main body during
operation.
- Otherwise, it may cause electrical shock.
• Install the air intake where polluted air can not be directly sucked in.
- It may cause various accidents, including suffocation, due to the
suction of harmful gasses(CO, etc.)
• Use the designated electrical wires for the terminal board
connections, and connect the wires securely so that they will not
become disconnected. (Failure to ensure proper connections may
cause fire.)
• Means for disconnection must be incorporated in the fixed wiring
in accordance with the wiring rules.
Operation
• When the product is soaked (flooded or submerged), contact an
authorized service center.
- There is risk of fire or electric shock.
All manuals and user guides at all-guides.com
- 1 -
Copyright © 2019 - 2020 LG Electronics Inc. All Rights Reserved.
• Don't touch a dedicated circuit or breaker with wet hands.
- There is risk of electric shock.
• Be cautious that water could not enter the product.
- There is risk of fire, electric shock, or product damage.
• Turn the breaker off when cleaning or maintaining the product.
- There is risk of electric shock.
• Glove should be worn when doing the installation work. (There is
risk of injury.)
CAUTION
!
Installation
• Do not install the product at a smoky and oily place like kitchen or
factory.
- Otherwise. oil may adhere to the filter cause trouble.
• Use two or more people to lift and transport the product.
- Avoid personal injury.
Operation
• Use a soft cloth to clean. Do not use harsh detergents, wax or
thinner, etc.
- Otherwise, color or surface deteriorate.
• Clean the filter regularly and use the gloves for cleaning.
- Adhering to a mass of dust may cause the deterioration of air
volume.
• Do not use the product for special purposes, such as preserving
foods, works of art, etc. It is a consumer ventilator, not a
precision refrigeration system.
- There is risk of damage or loss of property.
• Do not step on or put anyting on the product.
- There is risk of personal injury and failure of product.
Dimension Data
W
<FRONT VIEW>
SIZE [mm(Inch)]
W
743 (29-1/4)
597 (23-1/2)
ENGLISH
MBM67243101
Rev.03_010620
D
<SIDE VIEW>
D
H
1 149 (45-1/4)

Advertisement

loading

Summary of Contents for LG PKEMD1CA0

  • Page 1 All manuals and user guides at all-guides.com ENGLISH INSTALLATION MANUAL ECONOMIZER Copyright © 2019 - 2020 LG Electronics Inc. All Rights Reserved. MBM67243101 IMPORTANT SAFETY INSTRUCTIONS Rev.03_010620 READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE. • Don't touch a dedicated circuit or breaker with wet hands.
  • Page 2 All manuals and user guides at all-guides.com Economizer Installation . Connect the cable to the terminal block. - After inserting the cable into the bushing, fully insert it into the Installation of main body terminal block for connection. - With reference to the below writing diagrams accurately .