Inspira And Diamante - G 2120/G 2140/G 2150; Table 16: Water Hardness Settings, G 2020; Table 17: Rinse Aid Quantities, G 2020 - Miele G 1 Series Manual

Technical Information
Water Hardness [°d]
8 – 11
12 – 15
16 – 20
21 – 25
26 – 30
31 – 36
37 – 50
51 – 70

Table 16: Water Hardness Settings, G 2020

1
Standard setting.
Rinse Aid Volume [mL]

Table 17: Rinse Aid Quantities, G 2020

1
One milliliter equals 0.3 fluid ounces.
2
Standard setting.
2.7

Inspira and Diamante - G 2120/G 2140/G 2150

Initial requirements:
1. Close the door.
2. Switch off the appliance.
Accessing:
1. Press and hold the Start/Stop button.
2. Switch on the appliance.
3. Release the Start/Stop button.
4. Immediately press the Start/Stop button 5 times; on the 5
until the "Start/Stop" LED flashes.
5. Release the Start/Stop button.
6. If the "Start/Stop" LED does not light up, repeat the procedure.
Acknowledgement indicator:
The "Start/Stop" LED flashes rapidly (5 flashes per second).
Water Hardness [gpg]
1 – 4
5 – 7
1
Flash Pattern of "Rinse" LED
0
1
2
3
4
5
6
26
Flash Pattern of "Rinse"
1.1 – 4.3
5.4 – 7.5
8.6 – 11.8
12.8 – 16.1
17.1 – 21.4
22.5 – 26.8
27.8 – 32.1
33.2 – 38.5
39.6 – 53.5
54.6 – 74.9
—
1x rapidly
2x rapidly
2
3x rapidly
4x rapidly
5x rapidly
6x rapidly
G 1xxx/G 2xxx
LED
1x rapidly
2x rapidly
3x rapidly
1
4x rapidly
5x rapidly
6x rapidly
7x rapidly
8x rapidly
9x rapidly
1x slowly
th
time, hold