Operational Indicator; Residual Heat Indicator; Heater Element; On/Off Switch - Miele KM400 Series Technical Information

Technical Information
4.1.5

Operational Indicator

The Operational Indicator illuminates when the appliance is
switched on for usage.
4.1.6 Residual Heat Indicator(s)
The Residual Heat Indicator illuminates when the appliance
reaches a specific temperature alerting the user the cooktop
surface is hot. Even if the appliance is switched off; the indicator(s)
remains illuminated until the appliance cools down.
4.1.7

Heater Element

Figure 4-4: Electric Heater Element
The Heater Elements on all Miele KM400 Electric Combi-Sets are
powered by 240VAC via connections L1 and L2. The element
assemblies are designed to disperse heat only toward the cooking
surfaces. If the appliance is converted to operate at a lower voltage
(i.e. 208 VAC) a decal indicating the same, should be affixed to the
appliance. Under no circumstances should a lower voltage unit be
connected to higher voltages.
4.1.8

On/Off Switch

On the KM402 an On/Off Switch is used to switch the power being
supplied to the appliance / heater circuit.
KM400 Series Combi-Sets
22