Copy By Button Operation - Sony MVS-8000SF User Manual

3
Using any of the following methods, select the data to be copied or
swapped.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs to make the setting.
Knob
1
2
a) Transition control block wipe data
b) Independent key transition control block wipe data
For details of the data affected, see "Copy and Swap" (page 364).
4
To copy, press [Copy], and to swap, press [Swap].
This carries out the copy or swap.
To undo a copy or swap
Press [Undo], to return to the state before the copy or swap was carried out.

Copy by Button Operation

You can copy key data by a simple button operation.
Basic button operation
The basic button operation is to hold down the copy source button, then press
the destination button.
You can undo the last operation using [Undo] in the menu (see page 369).
Keyer copy button operation
Use the key delegation buttons in the respective banks.
To copy from M/E-1 key 1 to P/P downstream key 2
Hold down the M/E-1 key delegation button [KEY1] and press the P/P key
delegation button [DSK2].
Parameter Adjustment
Left No Select data for copy/swap
source
Right No Select data for copy/swap
destination
Setting values
a)
1 to 4
b)
1 to 16
a)
1 to 4
b)
1 to 16
Copy and Swap Operations
369