JVC KD-DV5300J Service Manual page 30

3.3.7 Removing the loading arm assembly
(See Fig.13 , 14)
• Remove the top cover, the mechanism section and the front
unit.
(1) From the top of the body, move the loading arm assembly
from the front side upward, and release the bosses from
the right and left joints k and m of the chassis base assem-
bly.
(2) Release the boss from notch n of the connect arm on the
right side of the body, and release the boss from notch p of
the slide cam assembly on the left side.
1-30 (No.MA308)
All manuals and user guides at all-guides.com
m
Side cam
assembly
Loading arm assembly
Fig.13
Loading arm assembly
p
m
k
Fig.14
n
k
n
Connect arm