Use smart picture
Use smart picture to apply pre-defined picture
settings.
1
Press
ADJUST.
2
Select [Smart picture], then press OK.
3
Select one of the following settings, then
press OK.
•
[Personal]: Apply your customized
picture settings.
[Vivid]: Rich and dynamic settings,
•
ideal for daytime viewing.
[Football]: Ideal settings for football
•
matches.
•
[Cinema]: Ideal settings for movies.
•
[Energy saving]: Settings that conserve
the most energy.
Manually adjust picture settings
1
Press .
2
Select [Setup] > [TV settings] > [Picture],
then press OK.
3
Select one of the following settings, then
press OK.
[Smart picture]: Access predefined smart
•
picture settings.
[Reset]: Reset to factory default settings.
•
•
[Contrast]: Adjust the intensity of backlight
areas, while the video contents are kept
unchanged.
[Brightness]: Adjust the intensity and
•
details of dark areas.
[Color]: Adjust color saturation.
•
•
[Tint]: Compensate for color variations.
[Sharpness]: Adjust sharpness in the image.
•
[Noise reduction]: Filter and reduce noise
•
in an image.
[Color temp.]: Adjust the color balance in
•
an image.
•
[Custom color temp]: Customize color
temperature setting. (Only available if
[Color temperature] > [Custom] is
selected)
[Digital Crystal Clear]: Fine-tune each
•
pixel to match surrounding pixels. This
setting produces a brilliant, high-definition
image.
[Advance sharpness]: Enables
•
superior picture sharpness.
[Dynamic contrast]: Enhance contrast.
•
[Medium] setting is recommended.
•
[Dynamic backlight]: Change
brightness of the TV backlight to
match lighting conditions.
[MPEG artifact reduction]: Smooth
•
out transitions on digital pictures.
•
[Color enhancement]: Make colors
more vivid and improves the details
in bright colors. You can switch this
feature on or off.
[Gamma]: For selected models.
•
Change the midtone intensity in
the picture. Black and white are not
affected.
[PC mode]: If available, when a PC is
•
connected to the TV, adjust the picture.
•
[Picture format]: Change the picture
format.
[Screen edges]: Change the viewing area.
•
(when set to maximum, you may see noise
or rough edge of an image).
[Picture shift]: If available, change the
•
picture position for all picture formats
except for [4:3], [Unscaled] and [Wide
screen].
EN
17