Replacing The Fuse; Replacing The Headlight Bulb - Yamaha NEO'S 4 2008 Owner's Manual

Replacing the fuse

1. Main fuse
The fuse holder is located behind
panel A. (See page 6-6).
If the fuse is blown, replace it as
follows.
1. Turn the key to "OFF" and turn off
all electrical circuits.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher ampera-
ge rating than recommended
to avoid causing extensive
damage to the electrical sys-
tem and possibly a fire.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU23503
1
Specified fuse:
15.0 A
3. Turn the key to "ON" and turn on
the electrical circuits to check if
the devices operate.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
[EWA15131]

Replacing the headlight bulb

If the headlight bulb burns out, repla-
ce it as follows.
NOTICE
Take care not to damage the follo-
wing parts:
6-26
G Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it
free from oil, otherwise the
transparency of the glass, the
luminosity of the bulb, and the
bulb life will be adversely affec-
ted. Thoroughly clean off any
dirt and fingerprints on the
headlight bulb using a cloth
moistened with alcohol or thin-
ner.
G Headlight lens
Do not affix any type of tinted
film or stickers to the headlight
lens.
Do not use a headlight bulb of
a wattage higher than speci-
fied.
EAUS1402
ECA10650
6