Increasing the Resemblance of Prints to Their
Counterparts in Offset Printing (SWOP Emulation)
When printing, SWOP Emulation enables you to lower the density of halftones to more closely
match the hues produced in offset printing. This function is effective when printing CMYK
images via a print controller (option).
IMPORTANT
•
SWOP Emulation is available only when a print controller (option) is installed.
NOTE
•
This function cannot be used for copying from the platen glass or feeder (option).
•
Do not use this mode when outputting images in RGB. Using this mode with RGB images results in
a generally dull and flat-coloured output.
•
For information on CMYK images and RGB images, refer to the manual of your application software.
1
Display the required screen as follows:
(Additional Functions) → [Adjustment/Cleaning] → [
Press
2
Press [On], then use [-] and [+] to make adjustments for each colour. Then
press [OK].
If you do not want to specify SWOP Emulation, press [Off] → [OK].
3
Press [Done].
] → [SWOP Emulation]
] or [
Adjusting the Copier (Adjustment/Cleaning)
2
2-45