NOTE:
The engine cannot be started with the lock
plate removed.
1. Lanyard
2. Lock plate
1. Lanyard
2. Lock plate
EMU26001
Engine stop button
To open the ignition circuit and stop the en-
gine, push this button.
EMU26070
Manual starter handle
To start the engine, first gently pull the han-
dle out until resistance is felt. From that posi-
tion, then pull the handle straight out quickly
to crank the engine.
2
1
ZMU02003
EMU26090
Main switch
The main switch controls the ignition system;
its operation is described below.
"
G
With the main switch in the "
tion, the electrical circuits are off, and the key
can be removed.
"
G
With the main switch in the "
tion, the electrical circuits are on, and the key
cannot be removed.
"
G
With the main switch in the "
sition, the starter motor turns to start the en-
Basic components
" (off)
" (on)
" (start)
ZMU02083
ZMU02287
" (off) posi-
" (on) posi-
" (start) po-
13