Troubleshooting - Craftsman 247.772460 Operator's Manual

Before performing any type of maintenance/service, disengage all controls and stop the engine. Wait until all
moving parts have come to a complete stop. Disconnect spark plug wire and ground it against the engine to
prevent unintended starting. Always wear safety glasses during operation or while performing any adjustments or
repairs.
This section addresses minor service issues. To locate the nearest Sears Service Center or to schedule service, simply contact Sears
at 1-800-4-MY-HOME®.
Problem
Engine fails to start
Engine runs erratically
Engine overheats
Excessive vibration
Drive-belt Slips

TROUBLESHOOTING

WARNiNg
Cause
1. Dirty air cleaner
2. Engine needs to be primed
3. Fuel tank empty
4. Stale fuel in gasoline tank
5. Spark plug wire disconnected.
6. Spark plug fouled
1. Spark plug wire loose
2. Stale fuel in gasoline tank
3. Vent in gas cap plugged
4. Water or dirt in fuel system
5. Dirty air cleaner
6. Carburetor out of adjustment
1. Engine oil level low
2. Air flow restricted
3. Dirty air filter
4. Carburetor out of adjustment
1. Edger blade bent or damaged
2. Blade spindle bent or damaged
1. Belt worn or stretched
NEED MORE HELP?
Find this and all your other product manuals online.
Get answers from our team of home experts.
Get a personalized maintenance plan for your home.
Find information and tools to help with home projects.
1. Refer to the Service And Maintenance Section.
2. Push primer bulb three times.
3. Fill tank with clean, fresh gasoline.
4. Drain gasoline and refill tank with clean, fresh
gasoline.
5. Connect the spark plug wire to the spark plug.
6. Clean, adjust gap or replace spark plug.
1. Connect and tighten spark plug wire.
2. Drain gasoline and refill tank with clean, fresh
gasoline.
3. Clear vent of any debris.
4. Drain fuel tank. Refill with fresh fuel.
5. Refer to the Service And Maintenance Section.
6. Contact a Sears or other qualified dealer.
1. Fill crankcase with proper oil.
2. Clean the area around the engine's cooling fins.
3. Replace the engine's air filter.
4. Contact a Sears or other qualified dealer.
1. Replace edger blade.
2. Contact a Sears or other authorized service dealer.
1. Replace drive belt.
managemyhome.com – for free!
19
Remedy