Pair The Earpieces With Your - Philips UT102 User Manual

Pair the earpieces with
your Bluetooth device at
the st time
Make sure that the earpieces is fully
charged.
Auto power on: open the charging
capsule, the earpieces discharged
and the blue LED indicator ash for 3
times with "power on" voice prompt;
Manual power on: on both earpieces
press and hold the multi-function
buttons for approxinmately 3s.
The right earphone led ashes
alternately in white and blue, and
the left earphone LED is o for 10s
and the blue LED ashes once.
Both earpieces are now
powered on and are paired
with each other.
The earpieces is now in pairing
mode and is ready to pair with a
Bluetooth device (e.g. a mobile
phone).
Blue LED
ashes once
for 10s
LED ashes
alternately in
white and blue
Turn on the Bluetooth function of
your Bluetooth device.

Pair the earpieces with your

Bluetooth device. Refer to the user
manual of your Bluetooth device.
In right earpieces, it has voice
"Connected"and LED goes o on
both earpieces and ash 1 time
every 10s. You can use your device
to play music or make a call.
Note
 After powering on, if the earpieces cannot nd
any previously connected Bluetooth device, it
will automatically switch to pairing mode.
The following example shows you
how to pair the earpieces with
your Bluetooth device.
Turn on the Bluetooth function
of your Bluetooth device, select
Philips UT102.
Enter the earpieces password
"0000" (4 zeros) if prompted.
For those Bluetooth devices
featuring Bluetooth 3.0 or higher,
no need to enter a password.
Philips UT102