Table of Contents
Advertisement
Filling the Bucket
1.
Position the bucket level to the ground.
2.
Drive forward and insert the bucket into the pile
of material.
3.
When the bucket is full, drive the machine in
reverse and gently tilt the bucket rearward to
decrease the lifting resistance when you lift the
load.
Important:
Always carry loads close to the
ground; refer to
Transport Position (page
Figure 5
Transport Position
When transporting a load, keep the attachment as
close to the ground as possible, no more than 15 cm
(6 inches) above the ground. Tilt it rearward to keep
the load level.
9).
1. No more than 15 cm (6
inches) above the ground
g266856
9
Figure 6
2. Tilt the load rearward
g319918
Advertisement
Table of Contents
