Bosch 1617 Operating/Safety Instructions Manual page 20

BM 2610908996 5/03
RA1170 EDGEFORMING DUST
EXTRACTION HOOD
Do not reach in area of the
WARNING
!
bit while the router is ON
or plugged in. To avoid entangling hoses,
do not use this dust extraction hood at
the same time as any other dust
extraction hood.
The RA1170 dust extraction hood (optional
accessory) is used for dust collection when
edge-forming (Fig. 24).
ATTACHING DUST EXTRACTION HOOD
You can attach the edge-forming hood in
several places according to your needs or
preferences. This hood is attached using two
of the screw holes on the router base that
are used to attach the router's sub-base.
Choose the desired location for the hood.
Loosen and take out the two screws from
the router base and attach the dust
extraction hood — over the router's sub-
base — using the screws provided with the
hood. Securely tighten the screws. (Figures
25 & 26).
FIG. 25
PLUNGE BASE
5/20/03 9:06 AM Page 19
FIG. 26
OTHER BASES
4mm x 16mm
SCREW
EXTRACTION
SUB-BASE
-19-
FIG. 24
WORKPIECE
EDGE
DUST
EXTRACTION
HOOD
4mm x 16mm
SCREW
DUST
HOOD
4mm x 16mm
SCREW
ROUTER
SUB-BASE
4mm x 16mm
SCREW
DUST
EXTRACTION
HOOD