Panasonic KX-TVM50 Manual page 50

5.18 Personal Custom Service
to transfer to an outside telephone
3
(may not be available).
• Next enter the outside line access
number and the desired outside
telephone number (including area
code if needed).
to transfer to a Custom Service, then
4
enter the desired Custom Service
number.
to activate Voice Mail Service.
5
to activate Automated Attendant
6
Service (Call Transfer Service).
to activate paging.
7
to repeat the greeting.
8
to transfer to the operator.
9
6. to accept.
2
7. Go on-hook.
Deleting Options from Your Personal
Custom Service
1. Log in to your mailbox.
• See 2.1 Logging in to Your Mailbox
if necessary.
2.
3 8 1
3. Press the desired dialling key (0, 3–9)
that you want to delete an option from.
4.
3
5. Go on-hook.
To Select the No DTMF Input
Operation
1. Log in to your mailbox.
• See 2.1 Logging in to Your Mailbox
if necessary.
2.
3 8 1
3. to select the No DTMF Input
1
Operation.
4.
1
5. for message recording.
1
to disconnect the caller.
2
for disconnect the caller after hours
3
(message recording for all other times).
6. to accept.
2
7. Go on-hook.
50 Subscriber's Manual
To Confirm the Settings for Your
Personal Custom Service
1. Log in to your mailbox.
• See 2.1 Logging in to Your Mailbox
if necessary.
2.
3 8
3. to review.
2
4. Go on-hook.
Note
• The System Administrator or the
System Manager must enable
Transfer to Outside for your mailbox
before it can be used.
• The Transfer to Outside option can
be used a maximum of 4 times in
your Personal Custom Service.
• Intercom Paging is only available
with Panasonic KX-T series PBXs
using APT or DPT Integration. For
more information, consult your
System Administrator.
• If your PBX uses PRI lines, you may
need to enter [#] at the end of outside
telephone numbers. For more
information, consult your System
Administrator.
Document Version 3.0 2010/07