Setting "Input Source; Setting "Tv - Sanyo DVR-500 Instruction Manual

Setting "Input Source"

1. Select "Input Source".
Example:
Record Show
Verify the settings. Press ENTER to edit.
Start
Record Time 21:30 22:00
Record Day 2004/05/03
Input Source Tuner
TV 10
Record Mode SP
Title 20040503
Press SETUP to exit Done
2. Press [ENTER].
"Input Source" screen appears.
Record Show
4
Press to change settings.
5
4
Input Source Tuner
5
Press SETUP to exit
4. Press [o] or [p] to select "Tuner", "AV1" or "AV2".
5. Press [ENTER] (or [a]) to select "Done".
6. Press [ENTER].
The recording input source is selected.
The screen returns.
Examples:
Record Show
Verify the settings. Press ENTER to edit.
Start
Record Time 21:30 22:00
Record Day 2004/05/03
Input Source Tuner
TV 10
Record Mode SP
Title 20040503
Press SETUP to exit Done
Record Show
Verify the settings. Press ENTER to edit.
Start
Record Time 21:30 22:00
Record Day 2004/05/03
Input Source AV1
TV
Record Mode SP
Title 20040503
Press SETUP to exit Done
End
Cancel
Done
Back
End
Cancel
End
Cancel

Setting "TV"

Select the TV channel number.
Note:
If "AV1" or "AV2" is selected for the Input Source, the channel
number does not appear. Skip this section.
1. Select "TV".
Example:
Verify the settings. Press ENTER to edit.
Start
Record Time 21:30
Record Day
Input Source Tuner
TV 10
Record Mode SP
Title 20040503
Press SETUP to exit
2. Press [ENTER].
"TV" screen appears.
Example:
4
Press to change settings.
5
4
TV 10
5
Press SETUP to exit
3. Press [o] or [p] to select the TV channel number.
4. Press [ENTER] (or [a]) to select "Done".
5. Press [ENTER].
The TV channel number is set.
The screen returns.
Example:
Verify the settings. Press ENTER to edit.
Start
Record Time 21:30
Record Day
Input Source Tuner
TV 12
Record Mode SP
Title 20040503
Press SETUP to exit
4, 5, a, b
-E35-
Record Show
End
22:00
2004/05/03
Done Cancel
Record Show
Done
Back
Record Show
End
22:00
2004/05/03
Done Cancel
ENTER