Advertisement
OPS
Use OPS
The Open Pluggable Specif ication (OPS) is an optional
hardware f or the large screen. The OPS has a built-in Windows
10 Enterprise operating sy stem and can be automatically
activ ated af ter being powered on and connected to a network.
Method
When installing or uninstalling the OPS positioned at the large
screen's back, ensure that a hard shutdown is perf ormed f or
the large screen's power button; otherwise, the OPS may be
abnormal. If the OPS is installed during dev ice power-on,
perf orm a hard shutdown and power on the OPS again bef ore
using it.
The large screen supports the Android and Windows modes.
•
Android (def ault): The OPS is presented as an app on the
large screen. In this mode, y ou can tap the Windows icon
in the lower lef t corner of the home page to access the
OPS. Tap Home to return to the home page.
•
Windows: The large screen is used as the display to
display the OPS only . To switch to the Windows mode,
choose Settings > Advanced > Switch to Windows
Mode in the lower right corner of the home page, and tap
Open. In this mode, y ou can swipe f rom the lef t edge of
the screen to the right to display the setting page. Tap
Advanced to switch back to the Android mode.
Note
•
Using the sof tware key board: In Windows, choose
Setting > Devices > Typing > Touch keyboard and
enable Show the touch keyboard when not in tablet
mode and there's no keyboard attached toggle.
•
Security settings: Choose Settings > Advanced >
Advanced Settings Password in the lower right corner
of the home page and set a password, which is
required f or accessing adv anced settings in both
Android or Windows mode.
Advertisement
